Andruav FAQ

Andruav app icon

For questions about accounts, access codes and servers, also read DroneEngage FAQ and the DroneEngage & Andruav Glossary.


General

Is Andruav a ground station app?

No. Andruav runs only on the phone on the vehicle. You monitor and control the vehicle from the WebClient in a browser. On a phone, use the WebClient — Mobile View. You do not install an app on the ground.

Which vehicles can I use?

ArduPilot drones, boats and rovers. Andruav connects to the ArduPilot flight controller of the vehicle.

What is new in Andruav 15?

The phone now runs the real DroneEngage modules, the same modules that run on a Raspberry Pi. See What Is New: DroneEngage Inside.

Should I use a phone or a Raspberry Pi?

Use a phone to learn and to prove your idea. Use a DroneEngage Raspberry Pi when people depend on the vehicle. The WebClient and the account are the same, so you can move from the phone to the Pi easily.

Is Andruav free?

Yes. Download it from Google Play and make a free account. See Andruav Getting Started.


Phone

Which phones can I use?

A phone with Android 7.0 or later and a 64-bit processor (arm64). The DroneEngage modules are built for 64-bit phones only.

Must I give all the permissions?

No. Andruav starts without them, but a feature that needs a permission does not work without it. For example, FPV needs CAMERA and SMS commands need the SMS permissions. See What Is New: DroneEngage Inside.

How do I make the screen easy to read in the sun?

Open the menu (⋮), tap Theme and select Sun.


Connection

Do I need the internet?

The phone needs a link to a Mission Server. This can be the internet to cloud.ardupilot.org, or a local Wi-Fi to your own air-gap server with no internet.

I tap CONNECT and the login screen opens. Why?

Andruav has no access code. Tap SIGN-IN, type your email and access code, and then tap CONNECT again.

The card shows “Native Unit Online” but not “SECURED”. Why?

Settings > Require SSL verification is off. The link works, but the phone does not check the certificate of the server. Turn it on, except for a private server whose certificate the phone cannot check.

How do I connect the flight controller?

Tap the FCB tile and select Bluetooth, USB, Wi-Fi or UDP. See Andruav Serial Port. To test with a simulator, see Andruav Simulation using SITL.

Can I use Mission Planner or QGroundControl?

Yes. Tap ENABLE TELEMETRY on the home screen. Then connect Mission Planner with UDPCI to the address that the Flight Telemetry card shows. See Andruav Telemetry.


Safety

What occurs if the phone loses the server link in flight?

If you turn on Settings > DroneEngage native > Comm-loss flight failsafe, the phone sets the flight controller to the mode that you select, for example RTL. It does this without the app screen and without a ground station. Test it in SITL first. See Andruav Simulation using SITL.

Can I control the vehicle when there is no internet?

You can send some commands by SMS, for example RTL and LAND. See Andruav SMS Reporting & Control. Do not use SMS as your only safety link.

Can a pilot stop the commands from the WebClient?

Yes. Turn on Settings > Enable RC Block. Then an RC switch blocks the commands from all ground stations. See RC Blocking.

How do I find a lost vehicle?

Use Settings > Lost Siren and Flash Screen. Also send ATT:LOC:<PIN> by SMS to get its location. See Andruav SMS Reporting & Control.


GPS and RTK

Can the phone GPS be the GPS of the flight controller?

Not yet. GPS Injection is coming. The setting is visible, but it is not active in this version. See Andruav GPS Injection.

Can Andruav send RTK corrections (NTRIP)?

Not yet. NTRIP RTK is coming. See Andruav Settings.